Asphalt / Asphalt Fiberglass / Composite Shingles

Asphalt shingle roofs have been in use since the late 1800s. Early versions were made from felts containing cotton or wool fibers. In the early 1940s, cellulose fibers derived from recycled paper or wood began being used to manufacture asphalt shingle mat. Since the late 1970s, the primary material has been inorganic fiberglass mat (over 80% of the current market). The mat is coated with asphalt that is then covered with a protective layer of U.V. resistant, colored ceramic granules. In the manufacture of fiberglass asphalt shingles, limestone is used as a void filler between individual mats and also provides resistance to fire and weather.

Unfortunately, while not true of the original shingle composition, the current limestone based shingles seem to encourage the spread of ugly roof stains.

According to the Asphalt Roofing Manufacturing Association, asphalt shingle roofs represent 80 to 85% of the current residential roofing market.  When the popularity of these shingles is considered plus the current use of limestone filler, it is easy to understand the reason for the wide spread occurrence of roof stains – especially in areas with high humidity as indicated on the following map.

Roof Stain Danger Area

The highly humid areas are indicated in green on the map.  These are areas most likely to be impacted by roof stains.

Stains are more prevalent on the north and west facing surfaces of the roof (and highly shaded areas) due to the reduced amount of sun received by these surfaces.  After a rain, these roof surfaces tend to not dry completely thus providing an ideal area for stains.  As stain increases on the roof, more and more moisture is held to the roof accelerating the problem.  The results is ugly roof stains that continue to get worse and worse over time.

    Your Cart
    Your cart is emptyReturn to Shop